Cement-Bonded Particle Boards


Fiber Cement Boards

Through Colored Fiber Cement Boards

System Solutions


/ TR EN /  Betopan Global / Dealer Login
Packaging / Storage / Handling

tepePAN Roof®

From the Master of Cement Board:

It is a new generation roofing sheet made of cement and fiber mixture, with high bearing capacity, in A1 fire resistance class, resistant to water, moisture and mold.
It is used as a carrier sheet under different roofing products such as tiles and shingles. In low and multi-storey buildings with A1 fire resistance class and superior structural features,
It can be used safely in many different projects (villas, apartments, hospitals, hotels, etc.), especially in adjacent buildings.
  • TepePAN Roof boards are mounted on the carrier profiles with rust-resistant screws, with the fiber direction of the board perpendicular to each other, with a gap of 5mm between them.
  • The axle spacing of the carrier elements should not exceed 600-625mm.
  • During the application, it is necessary to act on the screwed line.
  • Do not walk on the TepePAN Roof boards that are not fixed to the carrier profiles.

Standard Dimensions


 13  mm   


610 x 2440 mm
1220 x 2440 mm
1250 x 2500 mm

**** Special dimensions are possible by cutting the standard production size plates in width and length. Please contact for different thicknesses and sizes.

**** tepePAN Products should be cutted with dry cutting method.

Technical Properties 

Density (kg/m3 ) 

1150 ± 75 

Density (Wet) (kg/m3 ) 
1350 ± 100 

Thermal Conductivity Coefficient ( W/mK )


Bending Strength (N/mm2)

>13 > MOR > 7 

Pressure Strength ( MPA )


Fire Resistance (EN 13501-1)


Screw Pull-up Resistance  ( According with TS EN 320 ) 
>932 N

Breaking Load in Bending  ( Min. - Max. )
>1350 - 1450 N

Mold Growth

Water Resistance

Waterproof in accordance with TS EN 12467.

Edge Type

blunt edge

***Load-bearing values ​​in the table are given for 13mm TepePAN Roof plates.
***The values ​​in the table are 90 degrees horizontally to the load-bearing profiles under the long edges of the standard production size TepePAN Roof sheets; It is valid if all plate edges are screwed to overlap the load-bearing profiles.

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transpor

Sample Projects

 You can find sample projects of Tepe Betopan products in this section. 


Document Center

You can find product brochures, product catalogs and technical documents of Tepe Betopan products by clicking here.



You can reach the news about Tepe Betopan and other group companies by clicking here.


You can reach our contact information in this section.
Tepe Betopan

Tepe Betopan Yapı Malzemeleri
San. ve Tic. A.Ş.

All Right Reserved: © 2024

Follow Us

Merkez / Betopan Factory

Beytepe Köyü Yolu No:5 06800
Bilkent - Ankara / Turkey

Phone : +90 312 266 45 51 (pbx)

Fax : +90 312 266 01 50

Corporate : betopan@betopan.com.tr

Export : export@betopan.com.tr

Tepepan Factory

Alcı Mahallesi, ASO 2. ve 3. Organize
Sanayi Bölgesi 2026. Cadde No:12
Sincan - Ankara / Turkey