Cement-Bonded Particle Boards


Fiber Cement Boards

Through Colored Fiber Cement Boards

System Solutions


/ TR EN /  Betopan Global / Dealer Login
Packaging / Storage / Handling

Tepe Unique Pro® 

Natural and colourful looks that gives designers inspiration.

General Information
Pressed, through colored fiber cement boards with high durability class and water repellency, ready to use and do not require paint.

 Slight difference in appearance and / or colour can occur between different production batches.

Different trend colors (Light Gray, Gray, Anthracite, Cream, Mustard Yellow, Tile Red, Green); It has flat and line sanded surface appearances.

 Natural colour  and appearance differences may occur due to the orientation of the panel, the viewing angle, effects of light, moisture and wetness.
 White spots and other inclusions may appear inherent to the natural raw materials 

Tepe Unique Pro I Line I

If requested, it can be produced with flat surface.

Advantages of Use

  • Can be used by mechanical installation in ventilated facade system.
  • Can be used in various building projects “ residences, villas, public buildings,industrial buildings,
  • Prefab and modular houses.
  • No paint required.
  • Easy to install and modification.
  • Easy to cut and drill
  • Light weight and easy to carry
  • Protect the building from different weather conditions.
  • Provides for heat and acoustic insulations.
  • Resistant to seasonal changes.
  • Resistant to effect of sunlight.
  • Resistant to moisture and water.
  • Resistant to impact.
  • Environment friendly, asbestos free.
  • Odourless and does not release toxic gas.
  • Insect-proof, non putrescible, no moulding.

Areas of Application

  • Internal walls
  • Indoor ceilings
  • Wet spaces 

  • External walls & Facades
  • Outdoor ceilings
  • Soffit and fascia
  • Fences and boundary walls
  • Balcony and parapet

Standard Dimensions

Product Thickness (mm) Width (mm) Length (mm) Colours

Tepe Unique Pro®
6/8/10/12  1250 2500 Anthracite
Tepe Unique Pro®
6/8/10/12 1250 2500, 3000 Gray, Light Gray, Cream, Mustard, Green, Red Tile

 Special dimensions are possible by cutting standard production size plates in width and length.
 During the facade design, cutting and assembly phase, attention should be paid to the production direction of the boards.
 Tepe Unique Boards should be cutted with dry cutting method.

  Tepe Unique Boards should be used with a minimum 10 mm exterior applications. Otherwise, uses under 10 mm are excluded from warranty.

Technical Specifications 

Density   Anthracite / Cream
1450 ± 100 kg/m3 ( Dry ) 
1500 ± 100 kg/m3 ( Shipping Density )

Gray /Light Gray / Mustard / Tile / Green 
1250 ± 100 kg/m3 ( Dry) 
1350 ± 100 kg/m3 ( Shipping Density ) 
Bending Strength ( Avg. )  Anthracite/ Cream
≥ 13  N/mm2

Gray /Light Gray / Mustard / Tile / Green 
≥ 13 N/mm2
Reaction to fire  A1  ( EN 13501-1 )
Type & Durability classification   Anthracite / Cream/Gray /Light Gray / Mustard / Tile / Green
Category A , Class 3 

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transpor

Sample Projects

 You can find sample projects of Tepe Betopan products in this section. 


Document Center

You can find product brochures, product catalogs and technical documents of Tepe Betopan products by clicking here.



You can reach the news about Tepe Betopan and other group companies by clicking here.


You can reach our contact information in this section.
Tepe Betopan

Tepe Betopan Yapı Malzemeleri
San. ve Tic. A.Ş.

All Right Reserved: © 2024

Follow Us

Merkez / Betopan Factory

Beytepe Köyü Yolu No:5 06800
Bilkent - Ankara / Turkey

Phone : +90 312 266 45 51 (pbx)

Fax : +90 312 266 01 50

Corporate : betopan@betopan.com.tr

Export : export@betopan.com.tr

Tepepan Factory

Alcı Mahallesi, ASO 2. ve 3. Organize
Sanayi Bölgesi 2026. Cadde No:12
Sincan - Ankara / Turkey