Cement-Bonded Particle Boards

Accessories

Fiber Cement Boards

Through Colored Fiber Cement Boards

System Solutions




TR | EN

/ TR EN /  Betopan Global / Dealer Login
Description
Properties
System Types
Packaging / Storage / Handling

FireEx®


Advanced Fire Resistant Ventilated Facade System
 

FireEx facade systems are classified as A2 in the reaction to fire classification.

The system does not contribute to fire and is non-flammable.

Fire resistance is of great importance not only for the protection of the structure but also for the evacuation time from the building.

 

 

FireEx system consists of 5 main components

1- Load-Bearing Exterior Wall

The exterior wall of a building consisting of main components such as Reinforced Concrete, Aerated Concrete, Brick, Steel. Block and brick surfaces must be rough plastered.

 

2- Sub Construction

A load-bearing system consisting of anchors and profiles where the facade wall boards are mounted. When cement-bonded particle board or fiber cement board is used as exterior cladding, a galvanized steel anchor and profile system (L-J-M system) should be used. When through colored fiber cement board is used as an exterior wall board, an aluminum anchor and profile system (L-T system) should be used.

 

3- Insulation Layer

Knauf Insulation FCB series mineral wool product should be used. Homeseal 0.02 UV brand vapor barrier can be used on mineral wool.

 

4- Ventilation Gap

A minimum of 20 mm ventilation gap should be left.

 

5- Facade Wall Panels

Cement-bonded particle board, fiber cement board or through colored fiber cement board should be used.

 

Apart from the 5 main components, there are other components in the system, including VF fire anchors, dowels and screw fasteners.

Packaging
Packaging

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transpor
Packaging

The FireEx system has 3 types: FireEx Basic, FireEx Ultra and FireEx Unique, depending on the type of product used as the exterior panel.

The system using cement-bonded particle board (Betopanplus group products) as the exterior panel is called FireEx Basic.

The system in which fiber cement board (TepePAN group products) is used as the exterior panel is called FireEx Ultra.

The system in which through colored fiber cement board (Tepe Unique Pro group products) is used as the exterior panel is called FireEx Unique.


Galvanized steel anchor and profile system (L-J-M system) is used in FireEx Basic and FireEx Ultra systems.
Aluminum anchor and profile system (L-T system) is used in the FireEx Unique system.


image

image

 

Sample Projects

 You can find sample projects of Tepe Betopan products in this section. 

 

Document Center

You can find product brochures, product catalogs and technical documents of Tepe Betopan products by clicking here.

 

News

You can reach the news about Tepe Betopan and other group companies by clicking here.
 

Contact

You can reach our contact information in this section.
Tepe Betopan

Tepe Betopan Yapı Malzemeleri
San. ve Tic. A.Ş.


All Right Reserved: © 2024

Follow Us

Merkez / Betopan Factory

Beytepe Köyü Yolu No:5 06800
Bilkent - Ankara / Turkey

Phone : +90 312 266 45 51 (pbx)

Fax : +90 312 266 01 50

Corporate : betopan@betopan.com.tr

Export : export@betopan.com.tr



Tepepan Factory

Alcı Mahallesi, ASO 2. ve 3. Organize
Sanayi Bölgesi 2026. Cadde No:12
Sincan - Ankara / Turkey